EasyManua.ls Logo

HAMPTON BAY 52-RPT - User Manual

HAMPTON BAY 52-RPT
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
®
Item #1001 673 208, 1001 673 215,
1001 673 210
Model #51750, 51751, 51752
UL Model #52-RPT
USE AND CARE GUIDE
ROCKPORT 52-INCH CEILING FAN
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
THANK YOU
We appreciate the trust and condence you have placed in Hampton Bay through the purchase of this ceiling fan. We strive to continually create
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!
To view an instructional video on how to install this product:
1. Go to www.homedepot.com and enter either the Item or Model number, found in the top
right corner of the cover of this instruction manual, in the search eld.
2. Click on your product from the list of search results and click on the video link in the
“Product Overview” section.

Questions and Answers

  • G
    greencraigAug 17, 2025
    What to do if my HAMPTON BAY 52-RPT Fan wobbles?
    • N
      Nicholas MurphyAug 17, 2025
      If your HAMPTON BAY Fan wobbles, start by checking that all blade and blade arm screws are secure. Most fan wobble problems are caused when blade levels are unequal. To check this level, select a point on the ceiling above the tip of one of the blades. Measure the distance from a point on the center of each blade to the point on the ceiling, repeating for each blade. Any measurement deviation should be within 1/8 inch. If the fan continues to wobble after running for ten minutes, please contact Customer Service for a balancing kit.
  • R
    Russell BuchananAug 27, 2025
    How to fix a HAMPTON BAY 52-RPT that will not start?
    • M
      Mark WellsAug 28, 2025
      If your HAMPTON BAY Fan will not start, begin by checking the main and branch circuit fuses or breakers. Also, check the line wire connections to the fan and switch wire connections in the switch housing.
  • M
    Michelle JohnsonNov 7, 2025
    Why is my HAMPTON BAY Fan so noisy?
    • C
      Charles CrawfordNov 7, 2025
      There could be several reasons why your HAMPTON BAY Fan is noisy. Here are a few things you can check: * Make sure all motor housing screws are snug. * Ensure the screws that attach the fan blade bracket to the motor hub are tight. * Verify the wire nut connections are not rattling against each other or the interior wall of the switch housing. * Allow a 24-hour 'breaking in' period, as most noises associated with a new fan disappear during this time. * If you are using the Ceiling Fan light kit, ensure the screws securing the glassware are tight and that the light bulbs are also secure. * Confirm the canopy is a short distance from the ceiling and not touching it. * Check that your outlet box is secure and rubber isolator pads were used between the mounting plate and outlet ...

Summary

Safety Information

READ AND SAVE THESE INSTRUCTIONS

Essential safety precautions and instructions for installation and operation.

Assembly

Standard Ceiling Mount

Guides on connecting the fan motor assembly using the hanger pin and locking pin.

Hanging the Fan

Steps for lifting and seating the fan motor assembly onto the mounting bracket.

Making the electrical connections

Detailed guide on connecting fan wires to household electrical wiring.

Mounting the fan-motor assembly (standard mount)

Securing the fan motor assembly to the mounting bracket using canopy screws.

Operation

OPERATING YOUR FAN

Explains how to control fan speed with the pull chain and blade direction with the slide switch.

Care and Cleaning

WARNING: Make sure the power is off before cleaning your fan.

Safety warning to disconnect power before performing any cleaning.

Troubleshooting

Pre-Installation

Installation

Attaching the Fan Blades

Attaching the Lights

HAMPTON BAY 52-RPT Specifications

General IconGeneral
Number of Blades5
Motor TypeAC
ReversibleYes
Blade Span52 inches
WarrantyLifetime

Related product manuals