9. Operating Your Fan
NOTE
WAIT FOR FAN TO STOP BEFORE
CHANGING THE SETTING OF THE SLIDE
SWITCH.
Turn on the power and check the operation of
your fan. There are two pull chains available
in your fan:
1. 3-speed pull chain- it controls the fan
speed as follows:
1-Pull = High Speed
2-Pulls = Medium Speed
3-Pulls = Low Speed
4-Pulls = Fan Off
Speed settings for warm or cool weather
depend on factors such as the room size,
ceiling height, number of fans, and so on.
The slide switch controls directions: forward
(switch down ) or reverse (switch up ).
Warm weather - (Forward) A downward air
flow creates a cooling effect as shown in
Figure 18. This allows you to set your air
conditioner on a higher setting without
affecting your comfort.
Cool weather - (Reverse) An upward airflow
moves warm air off the ceiling area as shown
in Figure 19. This allows you to set your
heating unit on a lower setting without
affecting your comfort.
Figure 18
Figure 19
To Next Page
Loading...
Need help?
General
