HAMPTON BAY Hampton H300

To Next Page

To Previous Page

Hampton H300 Cast Freestanding Woodstove

INSTALLATION

10) Secure the 4 short legs to the unit using the bolts and washers

removed from step 9.

IMPORTANT

Flue center-line dimensions change when using the short leg option.

Also note that the Outside Air Kit (Part # 47000) cannot be used with the short leg option.

11) Carefully bring stove to standing position.

12) Open the front door and place the cast plug into the ash plug hole

and re-install the bricks.

13) Place the cast lid back on top of the stove.

14) Re-install fan, if removed.

HAMPTON BAY Hampton H300 - Page 20