EN
49
The machine is
not suitable for
connection to
the drinking
water supply
This high-pressure washer
must only be connected to
the municipal water conduit
system if a suitable non-
return valve is installed.
TECHNICAL DATA
Rated voltage: 220–240 VAC, 50 Hz
Nominal input power 1800 W
Safety class II
Protection rating IPX5
Rated pressure: 100 bar
Max pressure 140 bar
Rated ow: 6.7 l/min
Max ow: 7.8 l/min
Rated temperature 0–40°C
Max inlet pressure: 7 bar
Guaranteed sound power level, LwA 92 dB(A), K= 3 dB
Sound power level (LwA) 88 dB(A), K= 3 dB
Uncertainty KpA = 3 dB
Sound pressure level (LpA) 77 dB(A), K= 3 dB
Vibration 6.3 m/s², K= 1.5 m/s²
Weight 12.3 kg
Always wear ear protection.
The declared vibration value, which has been measured by a standardised
test method, can be used to compare dierent tools with each other and for a
preliminary assessment of exposure.
Warning: The actual vibration level when using power tools may dier from the
specied maximum value, depending on how the tool is used. It is therefore
necessary to determine which safety precautions are required to protect the user,
based on an estimate of exposure in actual operating conditions (taking into
account all stages of the work cycle, e.g. the time when the tool is switched o and
when it is idling, in addition to the start-up time).
To Next Page
Loading...
Need help?
General
