ITX-D255R Mini-ITX Mother Board Manual
23 / 31
3.3.4 Storage Configuration
3.3.4.1 SATA Controller(s)
Use this item to enable or disable the SATA.
3.3.4.2 Configuration SATA as
Use this to select SATA2 mode. Configuration options : [IDE Mode], [AHCI Mode]. The default value is [IDE Mode].
AHCI (Advanced Host Controller Interface) supports NCQ and other new features that will improve SATA disk performance
but IDE mode does not have these advantages.
3.3.5 Info Report Configuration
To Next Page
Loading...