4
MB3170-GB
Wheelchair parts
In order to be able to properly understand this manual, it is important that you
are aware of the commonest terms used to describe the various parts of the
wheelchair. Examine the drawings below and on the following page, and note the
relevant parts on your wheelchair.
The equipment on your wheelchair may vary slightly from that shown in Figures
1 and 2. If Cirrus 4 has been set up as a helper-guided chair, it is equipped with
different wheel sizes, as well as a brake lever for the assistant on the pushing
handle.
Head and neck support
Backrest cushion
Armrest
Seat cushion
Leg support
Footplate
Front castor wheel fork
Front castor wheel
Brake
Adjustment handle
for sliding seat
Figure 1
To Next Page
