What to do if Handicare IBIS XP Wheelchair frequency indicator lights are flashing at 6?
If the frequency indicator lights are flashing at 6, it means Motor 2 is in the NEUTRAL position. To resolve this, put the free wheel lever of motor 2 in the DRIVE position.
What to do if Handicare Wheelchair frequency indicator lights are flashing at 5?
If the frequency indicator lights are flashing at 5, it indicates that Motor 1 is in the NEUTRAL position. The suggested solution is to put the free wheel lever of motor 1 in the DRIVE position.
What to do if Handicare IBIS XP will not function?
If your Handicare Wheelchair isn't working, try these steps: 1. Turn the wheelchair off and then on again to see if that resolves the issue. 2. Make sure all charging plugs are correctly connected and secure. 3. Confirm the wheelchair is set to the DRIVE position, not NEUTRAL. 4. Check that the speed control setting hasn't been accidentally changed.
How to fix motor 2 in NEUTRAL position on Handicare IBIS XP?
The reason motor 2 is in the NEUTRAL position is because motor 2 is in the NEUTRAL position. To fix this, put the free wheel lever of motor 2 in the DRIVE position.
General| Brand | Handicare |
|---|---|
| Model | IBIS XP |
| Category | Wheelchair |
| Language | English |
Explains the purpose and usage of the user manual for safe operation and maintenance.
Identifies key components and their corresponding references for easy identification.
Provides contact information for expert assistance, maintenance, and repair services.
Details the essential information found on the product's identification plate.
Lists the standards the product meets and its compliance certifications.
States the product's conformity with the Medical Devices Directive and CE marking.
Outlines the terms and conditions of the product warranty, including coverage and limitations.
Defines Handicare's liability regarding product defects and user actions or misuse.
Provides guidance on the proper disposal, recycling, and environmental considerations for used wheelchairs.
Crucial safety guidelines and user responsibilities for operating and maintaining the wheelchair.
Explains the importance and placement of safety labels and symbols on the wheelchair.
Discusses potential electromagnetic interference and necessary precautions for safe electronic operation.
Overview of the IBIS XP's features, compact design, maneuverability, and intended use.
Identifies and labels the primary parts and components of the wheelchair.
Details the components and operational functions of the wheelchair's control unit.
Steps to check the wheelchair's lights, indicators, tyres, and battery charge before operation.
Procedures for safely entering and exiting the wheelchair, including switching off power.
Explains how to engage and disengage the drive mechanism using the free wheel levers.
Instructions for powering on the wheelchair using the on/off key.
Guidance on operating the wheelchair, including speed control and joystick use for direction.
How the wheelchair automatically brakes and procedures for an emergency stop.
Detailed steps for immediate cessation of movement in critical situations.
Various important operational notes and precautions for safe use.
Safe practices and speed recommendations for navigating turns and curves.
Instructions for safely driving over or around common obstacles like curbs.
Guidelines for safely ascending and descending inclines, including speed and positioning.
Steps to disassemble parts of the wheelchair for easier transport or maintenance.
Guidelines for safely securing and transporting the wheelchair in vehicles.
Procedure for adjusting the height of the wheelchair seat for optimal user positioning.
How to adjust the tilt angle of the wheelchair seat for comfort and support.
Adjusting the depth and height of a fixed controller mount for ergonomic access.
Adjusting the height and depth of a swing-away controller for improved user access.
How to install and adjust optional anti-tip brackets for enhanced stability and safety.
How to operate electrical adjustments like backrest recline and seat tilt.
Schedule and description of recommended daily, weekly, and monthly maintenance tasks.
Information on battery types, proper charging procedures, and essential maintenance.
Best practices for battery care, charging, and troubleshooting to ensure longevity.
Instructions on how to clean battery terminals and housing to prevent issues.
Guidance on when and how to replace the wheelchair batteries for optimal performance.
Procedure for checking and maintaining correct tyre pressure for safe operation.
Methods for cleaning the wheelchair's upholstery, metal, and frame parts.
A table to diagnose and resolve common operational issues based on indicator lights.
To Next Page
