WG‐500PHotspotinaPrinter
54
Item Default Description
TFTP Server
Session Trace Disable Disables or enables session trace function.
Primary TFTP Server IP
Address
Empty Enter the IP address of the primary TFTP server.
Secondary TFTP Server IP
Address
Empty Enter the IP address of the second TFTP server.
Send Session Trace log file
every~ minutes.
10 minutes The field means to send the session trace log file every interval
minutes. The value range is 5 to 1440 (minutes).
Send to Email
Disable Enables or disables the send to e-mail function.
E-mail Server
IP Address or Domain Name Empty Enter the SMTP server IP address or domain name. The
maximum allowed characters length is 50.
SMTP Port Empty The SMTP port allowed range is 25 or 2500 to 2599.
E-mail (SMTP) Server needs
to check my account
Disable If your SMTP server requires authentication before accepting
e-mail, click on check box. These values (username and
password) are supplied by your network administrator, SMTP
server provider or ISP.
Username Empty Enter the username for the SMTP server. The maximum allowed
characters length is 64.
Password Empty Enter the password for the SMTP server
Email From
Name Empty Enter the name you would like to appear in the “message from”
field of your outgoing message. The maximum allowed characters
length is 20.
Email Address Empty Enter your e-mail address. This is the address others will use to
send email to Email Address 1/Email Address 2.
Email To
Email Address 1 Empty Enter your first e-mail address to receive the logs.
Email Address 2 Empty Enter your second e-mail address to receive the logs.
To Next Page
Loading...
