H&S 4112 - Decal Location

-21-
DECAL LOCATION
Your rake was manufactured with operator safety in mind. Located on the rake are various decals to aid
in operation and warn of danger or caution areas. Pay close attention to all the decals.
Listed below are the decals on your rake. These decals may be ordered individually by part number or
by ordering the complete set.
311 1 Patent Numbers
2195 4 WARNING - Stay Clear of Rak
11102 1 ATTENTION: Adjust Flange Nut (4112 Only)
11599 3 WARNING - Do Not Go Near Leaks
11694A 4/12 - 6/14 DANGER - Stay Clear of Rake
11694B 2 DANGER - Stay Clear (4112 Only)
12197A 1 Attention: Raise Rake Wheels
54033 1 Made in the USA
71188B 1 Jack Storage Position
71271 2 Model 4112
71272 2 Model 4114
71275 2 H&S HI-Capacity Rake Decal Left and Rear 4112/4114
71277 1 H&S HI-Capacity Rake Decal Right 4112/4114
72203A 1 WARNING - Help Avoid Injury
84044 1 FEMA
84045 1 H&S Since 1967
093020 17 Grease Zerk
BFR723 1 SMV Sign Kit
DCAMB 4 Amber Reector - 2″ x 9″ (2 On Each Main Rake Beam)
DCAMB1 1 Amber Reector - 3-1/4″ x 5-5/8″
DCRED 2 Red Reectors
PART QTY DESCRIPTION
DO NOT REMOVE ANY OF THESE DECALS. IF THE DECALS ARE LOST, DAMAGED,
OR IF THE
Hi-Capacity RAKE IS REPAINTED, REPLACE THE DECALS.
REMEMBER: DECALS ARE FOR YOUR PROTECTION AND INFORMATION.