-13-
TRANSPORT LOCKS
Rake Beam Locks
Transport locks are mounted to the front of the pole. (A) Shows the rake locked into transport position.
(B) Shows the transport locks in the convenient storage position, to be used when in the raking mode.
Rake Wheel Locks
Located at the rear of the lift pipe, is a hair pin which is used to secure the rake wheels in the up position
for transport (C). When in the down, or raking position, place the locking hair pin in the convenient
storage position as shown (D).
A
B
C
D
TRANSPORTING
TOWING ON HIGHWAY
Follow state and local regulations when towing farm equipment on public highways. Never tow the rake
on a public highway at a speed greater than 20 m.p.h. (32 kph).
REFLECTORS
Red and Amber reflective safety decals are on the rake for safety. Refer to the Decal Placement Chapter
for location.
To Next Page
Loading...
