H&S Mini Maxx - Vehicle Setup - Defueling Parameters; Setting Defueling Parameters

22 Mini Maxx Installation Manual • www.hsperformance.com
DEFUELING PARAMETERS
Set up defueling parameters based on a number of dierent vehicle parameters. In this menu you
can also turn vehicle parameters o. The defueling parameters available are vehicle specic, so not
all defueling parameters are available for every make and model.
Here is a list of all of the defueling capabilities
for the Mini Maxx. All defueling options can be
activated at the same time, all can be turned o,
or a mix of on and o. Each defueling option is
adjusted individually to be on or o and set to a
particular defueling temperature.
Engine Coolant Temp Level
Boost Level
Go Back
DEFUEL MENU
Transmission Temperature
Oil Temperature
Pyro 1 Temperature Level
Pyro 2 Temperature Level
to Main Menu
Setting: 600˚F
Setting: 1250˚F
Setting: 210˚F
Setting: 260˚F
Setting: 210˚F
Setting: 23PSI
Use the Up Down Buttons to scroll up and
down through the dierent sub menu items.
Press to enter set up menu for defuel items.
Default Defueling Settings
Pyro 1 Temperature Level 1450˚F
Pyro 2 Temperature Level OFF
Engine Coolant Temp Hot 210°F
Engine Coolant Temp Cold
(cold start protection) OFF
Boost Level OFF
Transmission Temp Level OFF
Oil Temperature OFF
Current setting are displayed in Defuel Menu
SECTION 5: VEHICLE SETUP
This section describes various non-vehicle specic features of the Mini Maxx
INSTRUCTIONS CONTINUED