Hangar 9 EDGE 540 User Manual

PRE-BUILT
90
%
54
0540
EDGE
EDGE
Ultra Aerobatic 1.20 ARF
EDGE
EDGE
EDGE
EDGE
TM
TM
Specifications
Wingspan: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78′′ 198.10 cm
Length:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68.5′′ 174 cm
Wing Area:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1010 sq. in 651.6 dm
2
Weight (Approx.): . . . . . . . . . . . . . . . . . . . . 11-13 lbs 5-5.9 kg
Recommended Engines: 1.08 –1.50 2-Stroke
1.20 –1.80 4-Stroke
• 90% prebuilt
• High-quality hardware included
• Precovered in genuine Goldberg UltraCote
®
• Prefinished fiberglass cowl and wheel pants
INSTRUCTION MANUAL

Hangar 9 EDGE 540 Specifications

General

Brand	Hangar 9
Model	EDGE 540
Category	Toy
Language	English

Summary

Warning

Section 1: Hinging the Ailerons

Sealing the Hinge Gaps

Sealing hinge gaps prevents flutter, improves control response, and ensures consistent control.

Section 2: Joining the Wing Halves

Section 3: Installing the Aileron Servos

Section 4: Installing the Aileron Linkages

Section 5: Mounting the Wing to the Fuselage

Section 6: Installing the Tail

Section 7: Hingging the Horizontal Stabilizer and Elevator(s)

Section 8: Hingging the Rudder and Installing the Tail Wheel

Section 9: Installing the Control Horns

Section 10: Installing the Main Landing Gear

Section 11: Assembling and Mounting the Wheel Pants

Section 12: Installing the Engine

Section 13: Assembling and Installing the Fuel Tank

Section 14: Installing the Radio

Section 15: Installing the Control Linkages

Section 16: Attaching the Cowling

Section 17: Mounting the Hatch (with/canopy)

Section 19: Balancing the Edge 540

Section 20: Control Throw Recommendations

Preflight at the Field

Range Test Your Radio

Adjusting the Engine

AMA Safety Code

Radio Control

Safety guidelines related to radio control operation and frequency usage.