2
TABLE OF CONTENTS
Introduction 3
Warning 3
Additional Required Equipment 3
Tools and Supplies Required (not included in kit) 4
Contents of Kit 5
Section 1. Hinging the Ailerons 6
Section 2. Joining the Wing Halves 9
Section 3. Installing the Aileron Servos 12
Section 4. Installing the Aileron Linkages 14
Section 5. Mounting the Wing to the Fuselage 16
Section 6. Installing the Tail (Vertical and Horizontal Stabilizers) 17
Section 7. Hinging the Horizontal Stabilizer and Elevator(s) 20
Section 8. Hinging the Rudder and Installing the Tailwheel 21
Section 9. Installing the Rudder and Elevator Control Horns 23
Section 10. Mounting the Main Landing Gear 26
Section 11. Assembling and Mounting the Wheel Pants 27
Section 12. Installing the Engine (2/4 Stroke) 29
Section 13. Assembling and Installing the Fuel Tank 30
Section 14. Installing the Radio 32
Section 15. Installing the Control Linkages (Rudder/Elevator/Throttle) 34
Section 16. Attaching the Cowling 37
Section 17. Mounting the Hatch (with Canopy) 39
Section 18. Adding Decals 41
Section 19. Balancing the Edge 540 42
Section 20. Control Throw Recommendation 42
Set-up & Flying by Mike McConville 43
Preflight at the Field 49
AMA Safety Code 50
To Next Page
Loading...
