3.17 Lock after use
1. Choose a safe parking location, which should be a solid and flat surface with
no obstacles or heavy traffic.
2. Ensure the scissors are lowered to the bottom and all covers and doors are
closed and fastened securely.
3. Do not fully extend the hydraulic cylinder when the machine is powered off
or idle for a long time.
4. Press and turn the “Emergency Stop Switch “on the platform control box to
the “OFF” position.
5. Press and turn the “Emergency Stop Switch “on the ground control box to
the “OFF” position.
6. Turn the “Key Switch “on the ground control box to the “OFF” position and
pull the key out to avoid unauthorized operation.
7. Turn off the power switch.
8. Charge the battery.
their wires on the guardrail of the work platform or in the work area outside the platform,
never hang the electric tools directly by their wires.
To Next Page
Loading...