7 Operation instructions
Basic principles
★The "Operation Instructions" section provides specific instructions for all aspects of machine
operation. It is the operator's responsibility to follow all safety rules and instructions in the
operation manual.
★It is unsafe and even dangerous to use this machine for purposes other than lifting people and
tools to the aerial workplace.
Only fully trained and authorized personnel should operate the machine.
★If more than one operator uses the same machine at different times in the same work shift,
they must all be qualified operators and follow all safety rules and instructions in the operation
manual. This means that each new operator should conduct pre-operation check, functional tests
and workplace check before using the machine.
7.1 Emergency measures
Emergency stop
★Press the red "Emergency Stop" button on the ground control panel or platform control handle
inward to the “OFF” position, and all functions will be stopped.
★To restore any operating function, please pull out the "Emergency Stop" button to the “ON
(Open)” position and turn the power switch to the "ON" position.
Emergency lowering
★Pull out the emergency lowering handle.
Manual brake release
★Press the black reversing valve.
★Push the red manual pump repeatedly to release the brake.
7.2 Operate on the ground
★Turn the key switch to the ground control position.
★Pull out the red "Emergency Stop" button and set it to the “ON (Open)” position.
Adjust the platform position
1. Operate the lifting/lowering button based on the mark on the control panel.
To Next Page
Loading...