2626
4.4 4.4 Replacing Replacing the the batterybattery
Procedure:
Procedure:
––
Park the forklift in a Park the forklift in a safety place as required.safety place as required.
–– Open the battery cover(10).Open the battery cover(10).
–– Pull the battery plug (38) from Pull the battery plug (38) from the forklift socket. Put the plug the forklift socket. Put the plug and cables into the battery boxand cables into the battery box
(37). (37). Do Do not scratch not scratch the cables the cables when when taking out taking out the the battery.battery.
––
Remove the grub screw (40) and fixed block Remove the grub screw (40) and fixed block (41).(41).
–– Connect the lifting device with the two Connect the lifting device with the two lifting holes of the battery box (37) lifting holes of the battery box (37) and fasten them.and fasten them.
–– Pull the battery out of the box vertically by using of a crane.Pull the battery out of the box vertically by using of a crane.
––
Install the battery in the reverse sequences. Pay attention to the loading position of theInstall the battery in the reverse sequences. Pay attention to the loading position of the
battery and the wiring. Make sure they battery and the wiring. Make sure they are correct.are correct.
3838
4141
4040
1010
3737
WARNINGWARNING
Battery box is very heavy, be careful to avoid damage.Battery box is very heavy, be careful to avoid damage.
Make sure the lifting capacity of the crane is larger Make sure the lifting capacity of the crane is larger than battery weight.than battery weight.
Disposal to the Disposal to the waste battery should accord with local waste battery should accord with local environment regulation.environment regulation.
When replacing the battery, ensure that a battery of the same specification,When replacing the battery, ensure that a battery of the same specification,
dimension and weight is fitted.dimension and weight is fitted.
To Next Page
Loading...
