6868
2.3 2.3 Hydraulic Hydraulic unit unit dismantledismantle
Procedure:
Procedure:
–– Dismantle the hood.Dismantle the hood.
––
Dismantle the connector of the hydraulic unitDismantle the connector of the hydraulic unit
and the cylinder.and the cylinder.
–– Remove the wiring on the motor, contactor andRemove the wiring on the motor, contactor and
control valve.control valve.
––
Remove the tightening bolt that fix hydraulicRemove the tightening bolt that fix hydraulic
unit.unit.
–– Take down hydraulic unit.Take down hydraulic unit.
Assembling Assembling order is opporder is opposite to the disaosite to the disassembling ssembling orderorder..
To Next Page
Loading...
