HANGCHA CBD20-AEC1S - Start Up; Maintenance; Maintenance General



3030
6.2 6.2 Start Start upup
Procedure:
Procedure:
––
 Plug into the plug.Plug into the plug.
–– Turn on the key switchTurn on the key switch（（33））..
––
 Pull up the Pull up the emergency disconneemergency disconnect switchct switch
（（
1212
））
..
If you need to stand on the peda to operate for the stand-on type truck, you need open the pedalIf you need to stand on the peda to operate for the stand-on type truck, you need open the pedal
and coaming.and coaming.
33
1212

CAUTIONCAUTION
 Make sure the work ground is Make sure the work ground is hard enough to support the hard enough to support the truck.truck.

 Be careful to controBe careful to control the truck’s speed.l the truck’s speed.
https://www.besttruckmanuals.com/