2828
6 Operation6 Operation
6.1 6.1 Check Check before before operationoperation
In order for the safety truck operation andIn order for the safety truck operation and
keep the truck in good condition, beforekeep the truck in good condition, before
starting the truck, you must check it carefully.starting the truck, you must check it carefully.
1) 1) Oil Oil leak leak and and liquid liquid leak leak checkcheck
Check the truck for hydraulic oil, gear oil orCheck the truck for hydraulic oil, gear oil or
electrolyte leak.electrolyte leak.
2) 2) Fork Fork checkcheck
Check the fork and see whether bending orCheck the fork and see whether bending or
crazed.crazed.
3) 3) Front/rear Front/rear wheel wheel and balaand balance nce wheelwheel
checkcheck
Check the wheel and see whether there is anyCheck the wheel and see whether there is any
crazed, damaged, or abnormal wearing.crazed, damaged, or abnormal wearing.
Check the wheel fastners for looseness.Check the wheel fastners for looseness.
Inspect whether there is rope on the Inspect whether there is rope on the wheel.wheel.
4) 4) Check Check front front fork fork andand linkagelinkage
mechanismmechanism
Check the fork andCheck the fork and linkagelinkage mechanism, see mechanism, see
whether bending or crazed.whether bending or crazed.
Whether appear interfere when move,Whether appear interfere when move,
movement point wear whether severe.movement point wear whether severe.
5) 5) Hydraulic Hydraulic oil oil checkcheck
Open the hoodOpen the hood
Loosen the hydraulic oil filler cap, pull outLoosen the hydraulic oil filler cap, pull out
dipstick, and check if the oil level within thedipstick, and check if the oil level within the
scales. Add oil when scales. Add oil when insufficieinsufficient.nt.
Close the hood, and open the battery coverClose the hood, and open the battery cover
6) 6) Battery Battery checkcheck
Check the battery cover board. See whetherCheck the battery cover board. See whether
the battery fixed the battery fixed reliable.reliable.
Check proportion of electrolyte. Refer toCheck proportion of electrolyte. Refer to
“battery” section.“battery” section.
Check the terminal for loose or damage.Check the terminal for loose or damage.
Otherwise it will be adjust or Otherwise it will be adjust or replace.replace.
Plug in and turn on the key switch.Plug in and turn on the key switch.
7) 7) Instrument Instrument display display checkcheck
Refer to Refer to instrument part.instrument part.
8) 8) Lifting Lifting and and lowering lowering buttonbutton
Press the lifting button and check the forkPress the lifting button and check the fork
lifting condition. Press the lowering button,lifting condition. Press the lowering button,
check the fork lowering condition. Check if thecheck the fork lowering condition. Check if the
lifting system has lifting system has abnormal sound.abnormal sound.
9) 9) Forward Forward and and reverse reverse runningrunning
conditioncondition
Tilt the handle to some degree, graduallyTilt the handle to some degree, gradually
press the accelerator button to the outside ofpress the accelerator button to the outside of
the body with thumb, and inspect the forwardthe body with thumb, and inspect the forward
running condition; gradually press therunning condition; gradually press the
accelerator button to the inside of the bodyaccelerator button to the inside of the body
with thumb, and inspect the reverse runningwith thumb, and inspect the reverse running
condition.condition.
10) 10) Brake Brake systemsystem
When the truck run forward or backward, pushWhen the truck run forward or backward, push
the handle to vertical position or press to levelthe handle to vertical position or press to level
position to check the brake condition.position to check the brake condition.
11) 11) Steering Steering systemsystem
Left or right turn the handle to make the truckLeft or right turn the handle to make the truck
run around 3 turns, and then check if therun around 3 turns, and then check if the
steering system is steering system is normal.normal.
To Next Page
Loading...
