Hanil HyperCOOL HC3055 - 3 Installation; Wheel Lock; Switching on the Device

Technical Support : +82-2-3452-8966 / techsupport@ihanil.com
9/26
3.2 Switching On the Device
· After installing the device, lock the wheel to prevent the device from moving.
3. Installation
3.1 Wheel Lock
1. Connect the AC power cord to the power socket on the backside of the device and put the
plug into a power outlet.
▶ Check the proper power and the fuse speci󽗉cation.
2. Switch the device on by pressing the mains switch on the right side of the device.
Turn on the switch to [ I ].
1. Press the lever of the swivel caster to lock the wheel.