9
The dryer settings screen allows the customer to view/edit various
dryer set points and setup E-mail alerts that will send an e-mail to
up to 3 different e-mail addresses whenever an alarm or warning
occurs on the dryer.
Figure 5: Settings
2. Modbus TCP
The Modbus TCP connection allows you to continuously monitor
the dryer from a DCS system which implements a Modbus TCP
master. The dryer controller implements a ModbusTCP server
on port 502. The following Modbus register table provides a list
of data that is available.
To Next Page
Loading...
Need help?
General
