EasyManua.ls Logo

HANKISON SPX HES Series - User Manual

HANKISON SPX HES Series
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
HES Series
Energy Saving Refrigerated Type Compressed Air Dryers
Models: HES800, HES1000, HES1250, HES1500, HES1750, HES2000, HES2500, HES3000
FORM NO.: 5001364 REVISION: 04/2015 READ AND UNDERSTAND THIS MANUAL PRIOR TO OPERATING OR SERVICING THIS PRODUCT.
INSTRUCTION MANUAL

Questions and Answers

  • V
    vnunezAug 18, 2025
    How to fix water downstream of HANKISON SPX HES Dehumidifier?
    • P
      Paula KingAug 18, 2025
      If there's water downstream of your HANKISON Dehumidifier, try these steps: * Blow out the system with dry air. * Check the valve positions and ensure they're correct. * Verify the connections are properly made. * Insulate or heat trace any air lines exposed to low temperatures, or use dry air to lower the dew point. * Install a separator ahead of the dehumidifier. Also, refer to section C for additional troubleshooting steps.
  • S
    sdavisAug 20, 2025
    What to do if HANKISON SPX HES Dehumidifier's ambient temperature is too high?
    • R
      Regina ReyesAug 20, 2025
      If the ambient temperature is too high, the condenser fins are clogged, there's obstructed flow across the condenser, or the fan motor or fan control switch is faulty in your HANKISON Dehumidifier, check the air temperature 6 inches in front of the condenser. Clean the condenser and ensure free airflow. Also, inspect the fan and switch operation.
  • C
    Carmen VincentAug 22, 2025
    How to resolve high pressure drop across HANKISON Dehumidifier?
    • J
      Jason TurnerAug 23, 2025
      To address a high pressure drop across your HANKISON Dehumidifier, you can check the flow rate and replace the filter element. Also, refer to section C for additional guidance.
  • J
    Jonathan CampbellAug 26, 2025
    What to do if the service interval specified has elapsed on HANKISON Dehumidifier?
    • J
      jesse22Aug 26, 2025
      If the service interval specified for your HANKISON Dehumidifier has elapsed, perform the scheduled service.
  • A
    Angel GreeneAug 28, 2025
    What to do when HANKISON SPX HES shows control system error?
    • J
      James MartinAug 28, 2025
      If you encounter a control system error with your HANKISON Dehumidifier, contact a qualified technician or the manufacturer’s service department for assistance.
  • G
    Gary BrownAug 30, 2025
    What to do if HANKISON SPX HES Dehumidifier drain line restricted or frozen?
    • S
      Susan JohnsonAug 30, 2025
      If the drain line of your HANKISON Dehumidifier is restricted or frozen, open the drain line to resolve the issue.
  • M
    Melvin StephensSep 2, 2025
    What to do if HANKISON Dehumidifier is overloaded?
    • A
      ajonesSep 2, 2025
      If your HANKISON Dehumidifier is overloaded, check the compressed air inlet flow, temperature, and pressure.
  • C
    Cynthia FosterSep 4, 2025
    What to do if HANKISON Dehumidifier drain mechanism faulty?
    • K
      Kathy HicksSep 4, 2025
      If the drain mechanism of your HANKISON Dehumidifier is faulty, check the drain by pressing the “Push to Test” button on the control panel. If it's still faulty, isolate the drain and rebuild the automatic drain.
  • O
    Oscar SandersSep 6, 2025
    What to do if high refrigerant pressure occurs in HANKISON SPX HES Dehumidifier?
    • C
      Craig ChoiSep 7, 2025
      If you are experiencing high refrigerant pressure that requires manual reset on your HANKISON Dehumidifier, check the current command status, the power to the compressor, and the display for any fault indicators.
  • M
    Michael FranklinSep 9, 2025
    What to do if HANKISON SPX HES Dehumidifier has low refrigerant charge?
    • T
      Thomas BakerSep 9, 2025
      If your HANKISON Dehumidifier has a low refrigerant charge, check the system pressures and temperatures to diagnose the issue.

Summary

General Safety Information

Pressurized Devices Safety

Safety precautions for handling pressure-containing components of the dryer.

Electrical Safety Precautions

Guidelines for safe electrical installation, wiring, and servicing procedures.

Breathing Air Quality Considerations

Information on air suitability for breathing and purification requirements.

Receiving, Moving, and Unpacking Procedures

Shipment Receiving and Inspection

Procedures for checking shipments for visible damage upon delivery.

Unpacking and Concealed Damage Reporting

Steps for reporting concealed damage found after unpacking.

Moving and Storage Precautions

Guidelines for safe handling, moving, and storing the dryer.

Installation Guide

Location and Clearances

Dryer placement, required clearances, and ventilation needs for optimal operation.

Piping Connections

Instructions for connecting air inlet, outlet, and bypass piping for the dryer.

Electrical and Drain Connections

Guidelines for electrical wiring and operation of electronic demand drains.

Operation and Monitoring

Operating Conditions and Start-up

Specifies operating limits and provides a step-by-step start-up procedure.

Communication Features (RS-485, USB, Ethernet)

Details on using RS-485, USB, and Ethernet ports for monitoring and data logging.

Maintenance Procedures

Monthly Maintenance Tasks

Routine checks and cleaning procedures to be performed monthly.

Annual Maintenance Tasks

Scheduled yearly maintenance including filter replacement and inspections.

Troubleshooting Guide

Common Dryer Issues and Solutions

Identifies common symptoms like water downstream, high pressure drop, and faults.

Dryer Sizing and Data

Sizing and Engineering Data Tables

Guide for determining dryer capacity and accessing engineering data.

Dryer Settings and Alarms

Dryer Set Point Table

Lists configurable set points and DIP switch functions.

Dryer Alarm Table

Explains various alarm conditions, triggers, and actions.

Dimensions and Weights

Model Dimensions and Weights

Physical dimensions and weights for various dryer models.

Dimensional Drawings

Visual representations of dryer dimensions for different model ranges.

Model 800 Electrical Schematic

Models 1000-1250 Electrical Schematics

Models 1500-1750 Electrical Schematics

Models 2000-2500 Electrical Schematics

Model 3000 Electrical Schematic

Transformer Pack Wiring

Replacement Parts

Air-Cooled Unit Parts

Lists replacement parts for air-cooled models.

Water-Cooled Unit Parts

Lists replacement parts for water-cooled models.

Cabinet Panels

Part numbers for replacement cabinet panels.

Warranty Information

HANKISON SPX HES Series Specifications

General IconGeneral
BrandHANKISON
ModelSPX HES Series
CategoryDehumidifier
LanguageEnglish

Related product manuals