EasyManua.ls Logo

HANKISON SPX HES3000 - User Manual

Default Icon
48 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
HES Series
Energy Saving Refrigerated Type Compressed Air Dryers
Models: HES800, HES1000, HES1250, HES1500, HES1750, HES2000, HES2500, HES3000
FORM NO.: 5001364 REVISION: 04/2015 READ AND UNDERSTAND THIS MANUAL PRIOR TO OPERATING OR SERVICING THIS PRODUCT.
INSTRUCTION MANUAL

Table of Contents

Questions and Answers

  • J
    Joann VincentAug 18, 2025
    How to fix water downstream of HANKISON SPX HES3000?
    • D
      Donald DavidsonAug 18, 2025
      If there's water downstream of your HANKISON Dehumidifier, try these steps: * Blow out the system with dry air. * Check the valve positions and ensure they're correct. * Verify the connections are properly made. * Insulate or heat trace any air lines exposed to low temperatures, or use dry air to lower the dew point. * Install a separator ahead of the dehumidifier. Also, refer to section C for additional troubleshooting steps.
  • H
    Hailey DuffyAug 20, 2025
    What to do if HANKISON SPX HES3000 Dehumidifier's ambient temperature is too high?
    • S
      sandra18Aug 21, 2025
      If the ambient temperature is too high, the condenser fins are clogged, there's obstructed flow across the condenser, or the fan motor or fan control switch is faulty in your HANKISON Dehumidifier, check the air temperature 6 inches in front of the condenser. Clean the condenser and ensure free airflow. Also, inspect the fan and switch operation.
  • R
    rodriguezjoshuaAug 23, 2025
    How to resolve high pressure drop across HANKISON Dehumidifier?
    • L
      lisa12Aug 23, 2025
      To address a high pressure drop across your HANKISON Dehumidifier, you can check the flow rate and replace the filter element. Also, refer to section C for additional guidance.
  • L
    Lynn WolfAug 26, 2025
    What to do if the service interval specified has elapsed on HANKISON Dehumidifier?
    • E
      Edward HunterAug 26, 2025
      If the service interval specified for your HANKISON Dehumidifier has elapsed, perform the scheduled service.
  • A
    abowersAug 28, 2025
    What to do when HANKISON SPX HES3000 Dehumidifier shows control system error?
    • C
      Christopher SanchezAug 28, 2025
      If you encounter a control system error with your HANKISON Dehumidifier, contact a qualified technician or the manufacturer’s service department for assistance.
  • L
    Loretta MaldonadoAug 30, 2025
    What to do if HANKISON Dehumidifier drain line restricted or frozen?
    • L
      laurasanfordAug 30, 2025
      If the drain line of your HANKISON Dehumidifier is restricted or frozen, open the drain line to resolve the issue.
  • V
    Vanessa McguireSep 2, 2025
    What to do if HANKISON SPX HES3000 is overloaded?
    • D
      Derek LangSep 2, 2025
      If your HANKISON Dehumidifier is overloaded, check the compressed air inlet flow, temperature, and pressure.
  • C
    Cynthia LaneSep 4, 2025
    What to do if HANKISON Dehumidifier drain mechanism faulty?
    • R
      Robert AndersonSep 4, 2025
      If the drain mechanism of your HANKISON Dehumidifier is faulty, check the drain by pressing the “Push to Test” button on the control panel. If it's still faulty, isolate the drain and rebuild the automatic drain.
  • J
    Joseph HoSep 6, 2025
    What to do if high refrigerant pressure occurs in HANKISON SPX HES3000?
    • E
      emckinneySep 7, 2025
      If you are experiencing high refrigerant pressure that requires manual reset on your HANKISON Dehumidifier, check the current command status, the power to the compressor, and the display for any fault indicators.
  • T
    Tonya WileySep 9, 2025
    What to do if HANKISON SPX HES3000 Dehumidifier has low refrigerant charge?
    • B
      brian41Sep 10, 2025
      If your HANKISON Dehumidifier has a low refrigerant charge, check the system pressures and temperatures to diagnose the issue.

Summary

HES Series Instruction Manual

GENERAL SAFETY INFORMATION

1.0 INSTALLATION

1.1 Location

Guidelines for selecting an appropriate installation site for the dryer.

2.0 OPERATION

2.1 Minimum;Maximum Operating Conditions

Specifies the environmental and operational limits for the dryer.

2.2 Start-up

Step-by-step guide for starting and configuring the dryer.

3.0 MAINTENANCE

3.1 Monthly

Routine maintenance tasks to be performed on a monthly basis.

3.2 Annual Maintenance

4.0 TROUBLESHOOTING GUIDE

5.0 REFERENCE

Sizing

Method for determining the correct dryer model based on operating conditions.

DRYER ALARM TABLE

7.0 DRAWINGS: ELECTRICAL SCHEMATIC

8.0 REPLACEMENT PARTS: Air-Cooled Units

REPLACEMENT PARTS: Water-Cooled Units

WARRANTY

HANKISON SPX HES3000 Specifications

General IconGeneral
BrandHANKISON
ModelSPX HES3000
CategoryDehumidifier
LanguageEnglish

Related product manuals