19
Hanna Instruments reserves the right to modify the design, construction and
appearance of its products without advance notice.
RECOMMENDATIONS FOR USERS
Before using these products, make sure they are entirely suitable for
the environment in which they are used.
Operation of these instruments in residential areas could cause
unacceptable interferences to radio and TV equipment, requiring the
operator to follow all necessary steps to correct interferences.
The metal band at the end of the probe is sensitive to electrostatic
discharges. Avoid touching this metal band at all times.
During operation, ESD wrist straps should be worn to avoid possible
damage to the probe by electrostatic discharges.
Any variation introduced by the user to the supplied equipment may
degrade the instruments’ EMC performance.
To avoid electrical shock, do not use these instruments when voltages
at the measurement surface exceed 24 VAC or 60 VDC.
Use plastic beakers to minimize any EMC interferences.
To avoid damage or burns, do not perform any measurement in
microwave ovens.
www. .com
information@itm.com1.800.561.8187
To Next Page
Loading...
Need help?
General
