Need help?Do you have a question about the Hanna Instruments HI 83099 and is the answer not in the manual?
General| Model | HI 83099 |
|---|---|
| Category | Measuring Instruments |
| Type | Photometer |
| Measurement Range (as NO3-N) | 0.0 to 30.0 mg/L |
| Resolution (as NO3-N) | 0.1 mg/L |
| Light Source | LED |
| Light Source Wavelength | 525 nm |
| Detector | Silicon Photocell |
| Parameters | Nitrate |
| Method | Adaptation of the cadmium reduction method |
| Power Supply | 4 x 1.5V AA batteries |
| Auto-off | After 10 minutes of non-use |
Instructions for checking the instrument upon receipt and verifying its contents.
Overview of the HI 83099 photometer and its capabilities.
Lists technical details, abbreviations, and accuracy definitions for the instrument.
Details the scientific principle behind photometric measurements using the Lambert-Beer Law.
Describes the instrument's physical parts and the measurement process.
Explains the function of each key on the instrument's keypad.
Provides crucial advice for ensuring accurate results.
Guidance on collecting samples and using reagents properly.
Instructions for handling powder reagents and using cuvettes with mixing techniques.
Details cuvette placement, cleaning, and general measurement precautions.
Discusses common factors that can interfere with measurement accuracy.
Essential safety information regarding chemical handling and spills.
Lists measurement methods with corresponding page numbers.
Instructions for powering the instrument and monitoring battery status.
Details the procedure for selecting the desired measurement method.
Describes how to store, view, and delete measurement data logs.
Viewing results in different forms and special unit conversions.
Instructions for adjusting display backlight and contrast settings.
Configuration options for date, time, language, tutorial, and beeper.
How to access help screens, support, and view instrument information.
Procedure for preparing samples with color or suspended matter using filtration.
Instructions for filtering samples and diluting concentrated samples.
Steps for preparing demineralized water using the provided bottle.
Formula and guidance for calculating and applying dilution factors for accurate results.
Details specifications, lists required reagents, and provides step-by-step measurement guide.
Instructions for blank preparation, sample measurement, and identified interferences.
Details specifications, lists required reagents, and provides step-by-step measurement guide.
Instructions for adding reagent, mixing, and obtaining Alkalinity results.
Details specifications and lists required reagents for Ammonia MR analysis.
Step-by-step guide for performing and executing an Ammonia MR measurement.
Details specifications and lists required reagents for Ammonia LR analysis.
Step-by-step guide for performing and executing an Ammonia LR measurement.
Details specifications, lists required reagents, and provides step-by-step measurement guide.
Instructions for adding reagent, mixing, obtaining results, and identified interferences.
Details specifications, lists required reagents, and provides step-by-step measurement guide.
Instructions for blank preparation, sample measurement, and identified interferences.
Details specifications, lists required reagents, and provides step-by-step measurement guide.
Instructions for reagent addition, mixing, obtaining results, and identified interferences.
Details specifications, lists required reagents, and provides step-by-step measurement guide.
Instructions for reagent addition, mixing, obtaining results, and identified interferences.
Details specifications and lists the required reagent for Chlorine Dioxide analysis.
Step-by-step guide for performing and executing a Chlorine Dioxide measurement.
Details specifications, lists required reagents, and provides step-by-step measurement guide.
Instructions for adding reagent, mixing, obtaining results, and identified interferences.
Details specifications, lists required reagents, and provides step-by-step measurement guide.
Instructions for adding reagent, mixing, obtaining results, and identified interferences.
Details specifications, lists accessories, and provides step-by-step measurement guide.
Instructions for obtaining apparent and true color readings.
Details specifications and lists required reagents for Copper HR analysis.
Instructions for adding reagent, mixing, obtaining results, and identified interferences.
Details specifications and lists required reagents for Copper LR analysis.
Instructions for adding reagent, mixing, obtaining results, and identified interferences.
Details specifications and lists required reagents for Cyanuric Acid analysis.
Step-by-step guide for performing and executing a Cyanuric Acid measurement.
Details specifications and lists the required reagent for Fluoride analysis.
Instructions for zeroing, obtaining readings, and identified interferences.
Details specifications, lists required reagents, and provides step-by-step measurement guide.
Instructions for blank preparation, sample measurement, result conversion, and interferences.
Details specifications, lists required reagents, and provides step-by-step measurement guide.
Instructions for blank preparation, sample measurement, unit conversion, and interferences.
Details specifications and lists the required reagent for Hydrazine analysis.
Instructions for adding reagent, mixing, obtaining results, and identified interferences.
Details specifications and lists required reagents for Iodine analysis.
Instructions for adding reagent, mixing, obtaining results, and identified interferences.
Details specifications and lists required reagents for Iron HR analysis.
Instructions for adding reagent, mixing, obtaining results, and identified interferences.
Details specifications and lists required reagents for Iron LR analysis.
Instructions for adding reagent, mixing, obtaining results, and identified interferences.
Details specifications and lists required reagents for Magnesium analysis.
Instructions for blank preparation, sample measurement, and identified interferences.
Details specifications and lists required reagents for Manganese HR analysis.
Instructions for adding reagents, mixing, obtaining results, and identified interferences.
Details specifications and lists the required reagent for Manganese LR analysis.
Instructions for adding reagents, mixing, obtaining results, and identified interferences.
Details specifications and lists the required reagent for Molybdenum analysis.
Instructions for adding reagents, mixing, obtaining results, and identified interferences.
Details specifications and lists required reagents for Nickel HR analysis.
Instructions for adding reagent, mixing, obtaining results, and identified interferences.
Details specifications and lists required reagents for Nickel LR analysis.
Instructions for adding reagents, mixing, obtaining results, and identified interferences.
Details specifications and lists required reagents for Nitrate analysis.
Instructions for adding reagents, mixing, obtaining results, and identified interferences.
Details specifications and lists required reagents for Nitrite HR analysis.
Instructions for adding reagent, mixing, obtaining results, and converting Nitrite HR results.
Details specifications and lists required reagents for Nitrite LR analysis.
Instructions for adding reagent, mixing, obtaining results, and identified interferences.
Details specifications and lists required reagents for Dissolved Oxygen analysis.
Instructions for adding reagents, mixing, obtaining results, and identified interferences.
Details specifications, reagents, reagent set, and required accessories.
Instructions for sample prep, reactor use, vial handling, and measurement execution.
Details specifications, reagents, reagent set, and required accessories.
Instructions for sample prep, reactor use, vial handling, and measurement execution.
Details specifications, reagents, reagent set, and required accessories.
Instructions for sample prep, reactor use, vial handling, and measurement execution.
Details specifications, reagents, and notes on chlorine interference.
Instructions for standard/chlorine measurement, and identified interferences.
Details specifications, lists required reagent, and provides step-by-step measurement guide.
Instructions for adding reagent, mixing, and obtaining the pH value.
Details specifications, lists required reagents, and provides step-by-step measurement guide.
Instructions for adding reagents, mixing, converting results, and identified interferences.
Details specifications and lists required reagents for Phosphate LR analysis.
Instructions for adding reagents, mixing, converting results, and identified interferences.
Details specifications and lists required reagents for Phosphorus analysis.
Instructions for adding reagents, mixing, converting results, and identified interferences.
Details specifications and lists required reagents for Potassium HR analysis.
Instructions for adding reagents, mixing, obtaining results, and identified interferences.
Details specifications and lists required reagents for Potassium MR analysis.
Instructions for adding reagents, mixing, obtaining results, and identified interferences.
Details specifications and lists required reagents for Potassium LR analysis.
Instructions for adding reagents, mixing, obtaining results, and identified interferences.
Details specifications and lists required reagents for Silica analysis.
Instructions for adding reagents, mixing, obtaining results, and identified interferences.
Details specifications and lists required reagents for Silver analysis.
Instructions for adding reagents, mixing, obtaining results, and identified interferences.
Details specifications and lists required reagents for Sulfate analysis.
Instructions for adding reagent, mixing, obtaining results, and identified interferences.
Details specifications and lists the required reagent for Zinc analysis.
Instructions for adding reagents, mixing, obtaining results, and identified interferences.
Describes common warning messages like 'No Light', 'Light Leak', 'Battery Low'.
Information on managing analyzed data using Hanna's compatible software.
Lists parameters, their measurement ranges, and associated methods.
Catalog of reagent sets and essential accessories for instrument operation.
Details the two-year warranty, coverage, and service procedures.
Advice on product suitability, environmental use, and EMC performance.
Provides contact information for Keison Products UK Office for inquiries.
To Next Page