23
• Press RANGE/GLP/ to edit the desired
month (01-12). If the key is kept pressed,
the month number is automatically
increased.
• When the correct month has been set,
press ZERO/CFM or READ/ /TIMER
to confirm. Now the display will show
the day blinking.
• Press RANGE/GLP/ to edit the desired
day (01-31). If the key is kept pressed,
the day number is automatically increased.
Note: It is possible to change the editing
from day to year and to month by
pressing READ/ /TIMER.
• Press ZERO/CFM to save the calibration
date.
• The instrument displays “Stor” for one
second and the calibration is saved.
• The instrument will return automatically
to
measurement mode
by displaying
dashes on the LCD.
or
To Next Page
Loading...
