27
NaCl CALIBRATION DATA
NaCl calibration data is stored automatically after a successful calibration.
To view the NaCl calibration data, press GLP when the instrument is in
NaCl measurement mode.
The instrument will display the time (hh:mm) of the last calibration.
Use the ARROW key to scroll through the calibration data:
• The date (mm.dd.yyyy).
• The salinity coefficient.
• The cell constant.
• The instrument ID.
Notes: • If no temperature compensation is selected during calibra‑
tion, the temperature coefficient is not displayed in GLP.
• Press GLP at any moment and the instrument will return
to measurement mode.
• If calibration has not been performed on the selected
range, the instrument displays “no CAL” message blinking.
To Next Page
Loading...
