4
HI 8633 and HI 8733 have been designed specifically for use in the areas
of production and quality control. It is often necessary to test samples with
different concentrations ranging from deionized water to brine.
Both models can be manually calibrated at 1 point.
The HI8733, with a built‑in temperature sensor and Automatic Temperature
Compensation, is the perfect instrument for measuring samples with
fluctuating temperature.
HI8734 has been specially designed for the water conditioning industry,
particularly in the softening, demineralization, reverse osmosis and
drinking water applications.
Three ranges of measurement assure the highest accuracy possible. In
addition, Manual Temperature Compensation is possible through a knob
on the front panel.
The ratio between conductivity and TDS is factory set at 0.5.
Moreover, the 4‑ring potentiometric probes supplied with the meters are
made of rugged PVC ‑ ideal for indoor, as well as outdoor measurements.
Remove the instrument from the packing material and examine
it carefully to make sure that no damage has occurred during
shipping. If there is any noticeable damage, please contact your local
Hanna Instruments Office.
Each meter is supplied with:
• Conductivity probe with DIN connector and 1 m (3.3’) cable:
• HI76301D for HI8633 and HI8734
• HI76302W for HI8733
• Calibration solution sachet
• Instruction manual
• Quality Certificate
• 9V alkaline battery (1 pc.)
Note: Save all packing materials until you are sure that the
instrument functions correctly. Any damaged or defective item
must be returned in its original packing materials together with
the supplied accessories.
GENERAL DESCRIPTION
PRELIMINARY EXAMINATION
To Next Page
Loading...
Need help?
General
