Hanna Instruments reserves the right to modify the design, construction or appearance of its
products without advance notice.
Warranty
HI96751 is warranted for two years against defects in workmanship and
materials when used for its intended purpose and maintained according to
the instructions.
This warranty is limited to repair or replacement free of charge.
Damages due to accident, misuse, tampering or lack of prescribed mainte‑
nance are not covered.
If service is required, contact your local Hanna Instruments Office . If under
warranty, report the model number, date of purchase, serial number and the
nature of the failure. If the repair is not covered by the warranty, you will be
notified of the charges incurred.
If the instrument is to be returned to Hanna Instruments, first obtain a
Returned Goods Authorization Number from the Customer Service Depart‑
ment and then send it with shipment costs prepaid. When shipping any
instrument, make sure it is properly packaged for complete protection.
To validate your warranty, fill out and return the enclosed warranty card
within 14 days from the date of purchase.
Recommendations
for Users
Before using these products, make sure that they are entirely
suitable for your specific application and for the environment
in which they are used.
Operation of these instruments may cause unacceptable
interferences to other electronic equipments, this requiring the
operator to take all necessary steps to correct interferences.
Any variation introduced by the user to the supplied equip‑
ment may degrade the instruments' EMC performance.
To avoid damages or burns, do not put the instrument in
microwave oven. For yours and the instrument safety do not
use or store the instrument in hazardous environments.
To Next Page
Loading...
