Need help?Do you have a question about the Hanna Instruments HI98194 and is the answer not in the manual?
General| Model | HI98194 |
|---|---|
| pH Range | -2.00 to 20.00 pH |
| ORP Resolution | 0.1 mV |
| Temperature Resolution | 0.1 °C |
| Conductivity Accuracy | ±1% of reading |
| TDS Accuracy | ±1% of reading |
| Resistivity Range | 0.00 to 100.0 MΩ·cm |
| Salinity Resolution | 0.01 ppt |
| Salinity Accuracy | ±1% of reading |
| PC Connectivity | USB |
| GLP | Yes |
| IP Rating | IP67 |
| Category | Water Quality Meters |
| Type | Multiparameter Meter |
| pH Resolution | 0.01 pH |
| pH Accuracy | ±0.01 pH |
| ORP Range | ±2000.0 mV |
| Temperature Range | -5.0 to 105.0 °C |
| Temperature Accuracy | ±0.2 °C |
| Conductivity Resolution | 0.001 mS/cm |
| Resistivity Resolution | 0.001 MΩ·cm |
| Salinity Range | 0.00 to 70.00 ppt |
| Seawater Range | 0.0 to 70.0 ppt |
| Atmospheric Pressure Range | 450 to 850 mmHg |
| Atmospheric Pressure Accuracy | ±3 mmHg |
| ISE Range | ±2000.0 mV |
| Calibration | Up to 5 points |
| Display | Graphic LCD with backlight |
| Logging Type | Manual or automatic |
| Power Supply | 4 x AA batteries or adapter |
| Auto-off | User selectable |
| Environment | 0 to 50 °C, 0 to 100% RH |
| Dimensions | 185 x 93 x 35.5 mm |
| Weight | 400 g |
Instructions for connecting sensors and probes to the HI9819X meter.
Details on the meter's temperature measurement range, resolution, accuracy, and calibration.
Steps for user calibration or restoring factory calibration for atmospheric pressure.
Details on organizing and storing logged data in lots on the meter.
Instructions for installing software and connecting the meter to a PC for data transfer.
Common messages and error codes for troubleshooting meter issues.
To Next Page
