Need help?Do you have a question about the Hanna Instruments HI98163 and is the answer not in the manual?
General| Brand | Hanna Instruments |
|---|---|
| Model | HI98163 |
| Category | Measuring Instruments |
| Language | English |
Details the items included with the instrument after shipping.
Provides essential safety precautions and guidelines for instrument use.
Identifies and explains the controls and display on the instrument's front panel.
Details the various connectors located on the top of the instrument.
Instructions for preparing the instrument and electrode for first-time use.
Procedure for taking pH measurements with the instrument.
Procedure for taking temperature measurements.
How to control and use the instrument's display backlight.
Guidance on when and how often to calibrate the pH electrode.
Step-by-step instructions for performing pH calibration.
Detailed steps for performing a five-point pH calibration.
Details on one, two, three, or four point calibration and first point modes.
Explanation of common error messages during calibration.
How to set up and use custom calibration buffer values.
Adjusting buffer values for Mili pH range calibration.
Procedure to clear existing calibration data.
Interpreting electrode status indicators and warnings.
Understanding and responding to the 'Clean Electrode' alert.
Information on calibration time-out and 'CAL DUE' alerts.
Viewing stored data from the last successful pH calibration.
Overview of configurable parameters like backlight, contrast, and power settings.
How to modify display backlight intensity and contrast level.
Configuration of automatic display dimming and instrument shut-off.
Procedure for setting the instrument's date and time.
Setting the preferred display formats for time and date.
Changing the display language and configuring audible alerts.
Setting instrument identification and communication baud rate.
Viewing meter details and setting calibration warning period.
Managing calibration modes and adding custom buffer values.
Displaying calibration points and configuring out-of-range warnings.
Procedure to store current measurement readings into memory.
Accessing and managing previously logged measurement data.
Steps to access the calibration modes for mV and temperature.
Detailed steps for calibrating the instrument's temperature sensor.
Step-by-step guide for calibrating the mV readings.
Instructions for connecting the instrument to a computer via USB.
Methods for remotely controlling the instrument using PC commands.
Details on command syntax, answer formats, and error codes.
Commands to retrieve pH, temperature, and mV readings.
Commands for retrieving model, GLP, and setup parameters.
Commands related to logging data, including specific records.
Steps to prepare the electrode before use, including rinsing and soaking.
Guidelines for taking measurements and proper electrode storage.
Routine checks and specific procedures for cleaning the pH electrode.
List of various cleaning solutions for different applications.
Catalog of pH buffer solutions and electrode storage solutions.
List of additional accessories like software, cables, and carrying cases.
To Next Page