Need help?Do you have a question about the Hanna Instruments HI98161 and is the answer not in the manual?
General| Brand | Hanna Instruments |
|---|---|
| Model | HI98161 |
| Category | Measuring Instruments |
| Language | English |
Details the front panel layout and controls of the pH meter.
Details the top panel connectors of the pH meter.
Instructions for preparing the instrument before first use.
How to perform pH measurements using the instrument.
Explains how temperature affects pH readings and how the meter handles it.
Details how to use and manage the instrument's backlight.
Step-by-step guide for calibrating the pH meter.
Details the procedure for performing a five-point pH calibration.
Describes calibration procedures for one, two, three, or four points.
Explains options for how a single-point calibration affects previous calibration data.
Lists and explains common error messages during pH calibration.
How to modify calibration buffer values in the mili pH range.
Explains the electrode condition indicator and Clean Electrode warning.
How the instrument monitors and warns about expired calibration status.
How to view the stored data from the last pH calibration.
Lists general parameters like backlight, contrast, date/time, language.
Lists specific parameters like calibration timeout and first point mode.
How to adjust backlight intensity and screen contrast.
Configuration of automatic backlight and instrument power off timers.
How to set the instrument's date, time, and format.
How to select language and enable/disable audible beeps.
How to set instrument identification and serial communication baud rate.
Displays firmware info and sets the calibration warning timeout.
Settings for first point calibration and managing custom buffer values.
Options to view calibration points and enable range warnings.
How to configure warnings for readings outside the calibration range.
How to store current pH and mV measurements into memory.
How to retrieve and manage stored measurement data.
How to control the instrument remotely via a terminal program.
Details command syntax, instrument responses, and error codes.
How to request instrument model, firmware, and calibration data.
How to request the instrument's setup parameters.
Commands for retrieving setup, logged, and specific record data.
Explains alkaline error and provides sodium ion correction data.
Steps for preparing the electrode before use, including cleaning.
Guidelines for taking measurements and storing the electrode properly.
Routine checks, probe maintenance, and specific cleaning procedures.
Instructions for using specific cleaning solutions for different applications.
List of available electrode cleaning solutions with codes and descriptions.
List of pH calibration buffer solutions and electrode storage solutions.
List of other accessories like probe, software, cable, and case.
To Next Page