Need help?Do you have a question about the Hanna Instruments HI98192 and is the answer not in the manual?
General| Brand | Hanna Instruments |
|---|---|
| Model | HI98192 |
| Category | Measuring Instruments |
| Language | English |
Identifies and describes the physical components of the instrument's front and top views.
Guides on setting up the instrument and performing initial measurements.
Outlines USP requirements and the initial stage of water quality testing.
Details the step-by-step procedure and standards for EC calibration.
Explains the single-point calibration process for NaCl measurements.
Covers expired calibration warnings and viewing last EC calibration data.
Information on storing and viewing the last NaCl calibration details.
Manages user-defined measurement profiles and settings.
Configures the time interval for automatic data logging.
Adjusts display brightness and contrast levels.
Sets automatic screen dimming and instrument power-off timers.
Configures the instrument's date, time, and display formats.
Selects display language and enables/disables audible beeps.
Sets a unique identifier and communication speed for the instrument.
Displays firmware version, calibration dates, and battery status.
Sets calibration warning periods and enables out-of-range notifications.
Selects temperature input and compensation methods.
Allows selection of specific measurement ranges.
Configures the cell constant and temperature compensation coefficient.
Sets the reference temperature and unit for measurements.
Instructions for recording current readings and viewing logged data.
Details how to start autologging and view stored automatic log data.
Covers connecting to PC, software, and fundamental command types.
Details specific commands for instrument control and data extraction.
Describes the process for replatinizing the conductivity probe.
To Next Page