4
Remove the instrument from the packing material and examine it carefully to make sure that no
damage has occurred during shipping. If there is any damage, notify your dealer or the nearest
Hanna Customer Service Center.
Each instrument is supplied with:
• HI763133 four‑ring conductivity/TDS probe with temperature sensor (1.5 m cable)
• HI7031M 1413 µS/cm calibration solution (230 ml)
• HI7035M 111.8 mS/cm calibration solution (230 ml)
• HI920015 Micro USB cable
• HI92000 PC Software
• 100 mL Plastic Beaker (2 pcs.)
• 1.5 V AA Batteries (4 pcs.)
• Instruction Manual and Quick Reference Guide
• Certificate
PRELIMINARY EXAMINATION
Note: Save all packing material until you are sure that the instrument functions correctly.
All defective items must be returned in the original packing with the supplied accessories.
To Next Page
Loading...
Need help?
General
