35
SETUP
SETUP mode allows viewing and modifying the measurement parameters.
These are general SETUP parameters for all the ranges and range specific parameters.
The following table lists the general SETUP parameters, their valid range and the factory default settings.
New Description Valid value Default
Select profile Add/View or select a profile
Logging
interval
Time for automatic logging 5, 10, 30 s
1, 2, 5, 10, 15, 30, 60,
120, 180 min
Disabled
(Log on demand)
Backlight Backlight level 0 to 7 4
Contrast Contrast level 0 to 20 10
Auto light off Time until backlight is ON Disabled
1, 5, 10 min
1
Auto power off Time after the instrument is
powered OFF
Disabled
5, 10, 30, 60 min
30
Date/Time 01.01.2006 to 12.31.2099
00:00 to 23:59
current date/time
Time Format AM/PM or 24 hours 24 hours
Date format DD/MM/YYYY
MM/DD/YYYY
YYYY/MM/DD
YYYY‑MM‑DD
Mon DD, YYYY
DD‑Mon‑YYYY
YYYY‑Mon‑DD
YYYY/MM/DD
Language Message display language Up to 3 languages English
Beep ON Beeper Status Enabled or Disabled Disabled
Instrument ID Instrument Identification 0000 to 9999 0000
Baud Rate Serial Communication 600, 1200, 2400, 4800,
9600
9600
Meter
information
Displays general
infomation