Hanna Instruments HI98192 User Manual

36
Item Description Valid value Default
Calibration
Timeout
(EC NaCl)
Number of days after
calibration warning is
displayed
Disable, 1 to 7 days Disable
Out cal range
check
(EC range only)
Display warning if the
reading is too far from the
calibration points
Enable/Disable Disable
Temperature
source
Temperature entry mode Probe/Manual Probe
Temperature
compensation
No TC, Linear
Non Linear
Linear
Range select Fix one specific range Automatic, Fix one
resolution of EC or
resistivity range
Automatic
Cell constant Manual set of the cell
constant
0.010 to 10.000 1.000
Temperature
Coefficient
Set the coefficient for linear
temperature compensation
0.00 to 10.00 %/°C 1.90 %/°C
Temperature
Ref (°C)
Reference temperature 15 °C, 20 °C, 25 °C 25 °C
Temperature unit °C or °F °C
TDS factor
(TDS range only)
0.40 to 1.00 0.50
The following table lists the specific range parameters:
SETUP

Hanna Instruments HI98192 Specifications

General

Brand	Hanna Instruments
Model	HI98192
Category	Measuring Instruments
Language	English