45
Use the / keys to change selection.
Press Accept to confirm or ESC to exit without saving. If Automatic is selected the instrument changes
the range automatically according with the input.
If one of the range is selected all the readings are displayed on the corresponding range.
The readings will be displayed with maximum 6 digits. If the reading exceeds the maximum number
of digits for the fixed range, the maximum value is displayed blinking.
Note: The Range select parameter can be set only in EC and Resistivity range.
Cell Constant
Highlight Cell Constant.
Press Modify to change the cell constant value.
Use / keys to change the cell constant value.
Press Accept to confirm or ESC to exit without changing.
SETUP
To Next Page
Loading...
