To Next Page

To Previous Page

Temperature Coefficient

Highlight Temperature Coef..

Press Modify in order to set the temperature coefficient.

Use the / keys to change the value.

Press Accept to confirm or ESC to exit without changing.

Temperature Reference

Highlight Temperature Ref [°C].

Press the corresponding functional key to select the desired reference temperature.

Temperature Unit

Highlight Temperature Unit.

Press the displayed functional key in order to change the temperature unit.

SETUP

Dear Customer2
Table of Contents3
Preliminary Examination4
General Description5
Functional Description6
Front View6
Top View6
Specification7
Measurements9
Initial Preparation9
Operational Guide9
EC Range10
Resistivity Range10
TDS Range10
Salinity10
Natural Seawater Scale (UNESCO 1966)11
Practical Salinity Scale11
Autoranging14
No Temperature Compensation (no TC)15
Non Linear Temperature Compensation15
Linear Temperature Compensation15
Temperature Compensation15
Conductivity Versus Temperature Chart16
USP Measurement17
USP Requirements17
Instrument Specifications17
Meter Calibration17
Temperature and Conductivity Requirements18
Ph and Conductivity Requirements20
USP Mode Procedures22
From EC Range25
From Salinity % Range25
Clear Calibration31
Replace Calibration Standard31
Nacl CALIBRATION32
Temperature Compensation32
- Expired Calibration33
- Last Ec Calibration Data33
- LAST Nacl % CALIBRATION DATA34
User Calibration34
- Setup35
- General Parameter Screens37
- Select Profile37
- Logging Interval38
- Backlight38
- Contrast39
- Auto Light off39
- Auto Power off39
- Date/Time40
- Time Format40
- Date Format40
- Instrument ID41
- Beep on41
- Language41
- Baud Rate42
- Meter Information42
- Range Specific Parameters43
- Calibration Timeout43
- Out of Calibration Range Check43
- Temperature Source44
- Range Select44
- Cell Constant45
- Temperature Unit46
- Temperature Coefficient46
- Temperature Reference46
- View Log on Demand Data47
- Logging the Current Data47
- Start Autolog50
- View Autolog Data50
Setup50
Autolog51
Autoend52
- Temperature Calibration54
- Simple Commands56
- PC Interface56
- Command Types56
- Sending Commands from Pc56
- Commands Requiring an Answer57
- To Replace the Batteries63
- Troubleshooting Guide64
- Replatinization65
- Accessories66
- Recommendations for Users67

Brand	Hanna Instruments
Model	HI98192
Category	Measuring Instruments
Language	English

Hanna Instruments HI98192 User Manual

Table of Contents

Questions and Answers:

Hanna Instruments HI98192 Specifications

Related product manuals