10
EC range
The conductivity range is from 0 to 400 mS/cm. The actual conductivity range (the uncompen‑
sated conductivity) is up to 1000 mS/cm. The instrument will display conductivity readings up to
1000 mS/cm.
Note: The symbol in front of the temperature reading means that the temperature can be
entered by the user (Manual option selected in SETUP, or temperature out of range).
Resistivity range
The reciprocal of the conductivity of a material is the resistivity.
TDS range
A conductivity measured value can be corrected to a total dissolved solids value using the TDS factor.
Salinity
The salinity is derived from the conductivity of a sample.
Salt % range
The percent of salinity in a sample is dependent on the sample and the salinity coefficient.
OPERATIONAL GUIDE
To Next Page
Loading...
Need help?
General
