20
METHOD PROCEDURE
8. METHOD PROCEDURE
REQUIRED REAGENTS
Code Description Quantity
HI93739A-0 Fluoride HR Reagent A 2 mL
HI93739B-0 Fluoride HR Reagent B 8 mL
REAGENT SETS
HI93739-01 Fluoride HR Reagent - 100 tests
HI93739-03 Fluoride HR Reagent - 300 tests
For other accessories see ACCESSORIES section.
MEASUREMENT PROCEDURE
Note: If tutorial mode is disabled, follow the measurement procedure below. If the
tutorial mode is enabled, press Measure and follow the messages on the screen.
• Use a 1 mL syringe and add
2 mL of HI93739A-0 Fluoride
HR Reagent A to the cuvette;
and use the pipette to fill up
the cuvette, to the 10 mL mark,
with HI93739B-0 Fluoride HR
Reagent B.
• Replace the plastic stopper and the cap. Invert
several times to mix.
• Insert the cuvette into the holder and ensure that
the notch on the cap is positioned securely in the
groove.
10 mL2 mL
#1
To Next Page
Loading...
Need help?
General
