10
Press <Log> to display the logging menu. You can either log a single sample on the meter,
start an interval log on the meter, or start an interval log on a logging probe (HI7629829).
See Chapter 11 for more details.
Press <Menu> to enter setup mode. You can configure which parameters you want to measure,
calibrate the sensors, change system settings, access the GPS menu and view the meter and probe status.
HI9829 features context sensitive HELP, which provides useful information regarding the displayed
screen.
Simply press the HELP key to access this function, then use the / keys to scroll through the
message.
To escape from the HELP window, press the HELP key again or ESC.
The main operating modes for HI9829 are measurement, logging and setup.
The measurement screen can be configured to display a single measurement or up to 12 simultaneous
measurements by using the numbers 1‑7 on the keypad.
Use the / keys to scroll through the measurements not being displayed.
See Measurement Mode for more details.
The measurement units will blink if the system has not been calibrated and the measurement number
will blink when the reading is out of range.
BASIC OPERATIONHELP FUNCTION
To Next Page
Loading...
