60
ISE
• From the “GLP” menu, select the “ISE” option.
• Data regarding the last ISE calibration will be displayed:
standards used, sensor type, time and date of the
calibration.
• Use the / keys to scroll through the stored data for the last 5 calibrations.
• Press ESC to return to the “GLP” menu.
Notes: If no ISE calibration has been performed or if calibration was cleared using the
“Restore factory calib.” option the offset and slope values are set to default, and the message
”Factory calibration” is displayed. Press <ESC> to return to the previous screen.
ORP
• From the “GLP” menu select the “ORP” option.
• Data regarding the last ORP calibration will be displayed:
calibration point, time and date.
• Use the / keys to scroll through the stored data for
the last 5 calibrations.
• Press ESC to return to the “GLP” menu.
Notes: If no ORP calibration has been performed or if calibration was cleared using the
“Restore factory calib.” option the offset and slope values are set to default, and the message
”Factory calibration” is displayed. Press <ESC> to return to the previous screen.
Dissolved Oxygen
• From the “GLP” menu select the “Dissolved oxygen”
option.
• Data regarding the last D.O. calibration will be displayed:
calibration points, % saturation or concentration, time and
date.
• Use the / keys to scroll throught the stored data for the last 5 calibrations.
GLP DATA
To Next Page
Loading...
