71
• Press <Delete> to delete the selected remark from the
meter. If the deleted remark is used in an existing lot, the
information will be still available in the lot data.
Delete all remarks
• Select “Delete all remarks” to delete all remarks. The
display will show the message “Do you want to perform the
current operation?”. Press <Yes> to delete or <No>
to return to the previous screen.
Tag Identification System
iButton
®
tags can be installed at sampling sites to simplify data logging. Tags have a unique serial
number and a user‑entered alphanumeric tag identifier. When the matching connector on the meter
contacts the tag, logged measurements are labeled with the tag serial number and tag identifier. Tag
configuration is accessed through the Log menu. A total of 100 tags can be saved in meter’s memory,
with SN and ID. When downlaoding logs using the PC software, HI929829, for saved tags the SN will
be replaced with the ID given by the user.
Read tag
• Select the “Read tag” option to view and modify the information associated with tag, or to insert
new tag IDs.
• The display shows the message “Touch the tag with the tag reader”. Touch the tag with the tag
reader located on the top of the meter.
• When the tag is detected the meter displays the tag serial number and ID (if available).
• Press <Modify> to change the tag identifier or <OK> to close the window and store the tag
info (SN and ID if entered).
• Press ESC to close the windows without storing the tag
info.
Search SN
• Select “Search SN” to search for a tag by serial number.
• Insert the serial number using the meter keypad and then press <Accept>.
LOG NOTES
To Next Page
Loading...
