Hanna Instruments reserves the right to modify the design, construction or appearance of its products
without advance notice.
Recommendations
for Users
Before using this meter, make sure it is entirely suitable for your
specific application and for the environment in which it is used. Any
variation introduced by the user to the supplied equipment may
degrade the meter’s performance. For yours and the meter’s safety
do not use or store the meter in hazardous environments.
The HI9829 is warranted for two years against defects in workmanship and materials
when used for their intended purpose and maintained according to instructions.
Electrodes and probes are warranted for six months. This warranty is limited to
repair or replacement free of charge.
Damage due to accidents, misuse, tampering or lack of prescribed maintenance
is not covered.
If service is required, contact your local Hanna Instruments Office. If under warranty,
report the model number, date of purchase, serial number and the nature of the
problem. If the repair is not covered by the warranty, you will be notified of the
charges incurred. If the instrument is to be returned to Hanna Instruments, first obtain
a Returned Goods Authorization (RGA) number from the Technical Service department
and then send it with shipping costs prepaid. When shipping any instrument, make
sure it is properly packed for complete protection.
Warranty
To Next Page
Loading...
