User’s Manual
14
FRONT PANEL CONTROL
Power Button:
Press this button to switch ON/OFF of monitor’s power.
Power Indicator:
Blue — Power On mode.
Blue Flicker — Power Saving mode.
MENU / ENTER:
Turn the OSD menu on or used as《confirmation》function during start-up .
Adjust :
1. Adjust Contrast and Brightness change when the OSD is off.
2. Press【 】to enter Contrast adjustment.
3. Press【 】to enter Brightness adjustment.
4. Navigate through adjustment icons when OSD is ON or adjust a function when function is
activated.
【AUTO】Button: 《For VGA input》
1. The OSD menu return to the previous menu.
2. The 「Auto adjustment」 function works only for VGA input. (The auto adjustment function is
used to optimize the 「horizontal position」, 「vertical position」,「clock」,and 「phase」.)
NOTES:
Do not install the monitor in a location near heat sources such as radiators or electric heaters, or in
a place subject to direct sunlight, or excessive dust or mechanical vibration or shock.
Save the original shipping box and packing materials, as they will come in handy if you ever have
to ship your monitor.
To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains may be
removed with a cloth lightly dampened with a mild detergent solution. Never use strong solvents
such as thinner, benzene, or abrasive cleaners, since these will damage the cabinet. As a safety
precaution, always unplug the monitor before cleaning it.
To Next Page
Loading...
Need help?
General