Need help?Do you have a question about the HANSCRAFT Evolution 25 and is the answer not in the manual?
Technical specs for horizontal, R410A, heating-only models.
Diagram of the heat pump installation layout with surrounding components.
Detailed guidelines and requirements for safe and effective heat pump installation.
Guidance on optimal placement and chemical system integration for longevity.
Explanation of the LED controller's buttons and display for heat pump operation.
Guide on configuring various heat pump operational parameters via the controller.
Methods to check and display the heat pump's current operating status and temperatures.
Instructions for adjusting water temperature settings in running and standby modes.
Procedure to lock or unlock heat pump parameters for security and preventing changes.
How to set the current time on the heat pump controller for accurate operation.
Instructions for setting the timer to start heat pump operation at a specific time.
Instructions for setting the timer to stop heat pump operation at a specific time.
Procedure to cancel active timer settings for the heat pump.
How to reset all system parameters to their default factory settings.
Table of operational parameters, ranges, defaults, and remarks for configuration.
Explanation of LED controller error codes and their corresponding solutions.
Troubleshooting guide for malfunctions not indicated by LED controller error codes.
To Next Page
General