Page EN-22 Operation: Additional functions
Button lock/Child lock
The button lock allows you to secure the ap-
pliance from unwanted use. This is how you
prevent a cycle in progress from being inter-
rupted by mistake. To
• activate the button lock, simultane-
ously press and hold the two buttons
“Rpm ” (13) and “Start time preselec-
tion” (12) for approx. 3 seconds until you
hear three beeps.
All operating controls are locked (excep-
tion:
button (9)).
• deactivate the button lock, si-
multaneously press and hold the
two buttons “Rpm ” (13) and
“Start time preselection” (12) for approx.
3 seconds until you hear three beeps.
Please note! If you have switched off the
beeps, there will be no beeping, even when
you activate/deactivate the button lock.
Switching beeps on/off
You can decide whether or not there should
be a beep when a button is pressed and
when the cycle ends.
• To change the current setting, press the
“Rpm ” button (13) for 3 seconds.
To Next Page
Loading...
