Specifications
DSO4000 Series Digital Storage Oscilloscope 75
5.2 Accessories
All the following accessories are available.
Standard Accessories
X1, X10 two passive probes. The passive probes have a 6MHz bandwidth
(rated 100Vrms CAT III) when the switch is in the X1 position, and a
maximum bandwidth (rated 300Vrms CAT II) when the switch is in the X10
position. Each probe consists of all necessary fittings.
A USB A-B line, used to connect external devices with USB-B interface
like a printer or to establish communications between PC and the
oscilloscope.
A power cord special for this product. In addition to the power cord shipped
with your instrument, you may purchase another one certified for the
country of use.
A software installation CD. It contains the user manual of DSO4000, giving
particular descriptions on the DSO4000 series oscilloscopes.
*. To this digital storage oscilloscope, the PC software is not important, no
more advanced functions are developed. For example, 1. For the function
of "export into Excel format", there is aleady "Save into CSV" function on
the oscilloscope 2. Export is only possible with BMP format,etc.
5.3 Open Source Information
General Information:
Buzzer Driver, DMA Driver, FPGA Driver, I2C Driver,SPI Driver,
IO-bank Driver, USB Host Driver, LCD Driver, USB
massstorage、gadget Driver
busybox1.18.4, gnupg1.4.11
License: GPLV2 See Appendix B
To Next Page
Loading...
