Need help?Do you have a question about the Hantek DSO2D15 and is the answer not in the manual?
General| Bandwidth | 150 MHz |
|---|---|
| Channels | 2 |
| Sample Rate | 1 GSa/s |
| Memory Depth | 8 Mpts |
| Vertical Resolution | 8 bits |
| FFT | Yes |
| Digital Voltmeter | Yes |
| Frequency Counter | Yes |
| Trigger Modes | Edge, Pulse, Video, Slope, Alternate |
| Display | 7 inch TFT LCD |
| Vertical Sensitivity | 2 mV/div ~ 10 V/div |
| Waveform Generator | 25 MHz |
| Input Impedance | 1 MΩ ± 2% |
| Interface | USB Host, USB Device |
Essential safety guidelines for operating the oscilloscope.
Explanation of safety terms and symbols used in the manual.
Guidelines for proper device recycling and disposal.
Overview of the DSO2000 series oscilloscope features.
Steps for initial inspection, setup, and front panel overview.
Understanding the interface and performing basic operational checks.
Guidelines for using and compensating oscilloscope probes.
Detailed description of menu options and control buttons.
Identification of connectors, knobs, and softkeys.
Configuring settings, horizontal/vertical parameters.
Performing mathematical operations on waveforms.
Concepts and settings for triggering waveform acquisition.
Decoding and analyzing serial communication protocols.
Saving/recalling data, file management, and measurement techniques.
Using graticule, cursors, and auto-measurements.
Managing acquisition, display modes, and system settings.
Quick access buttons, default settings, and dual-window mode.
Setting up and editing waveforms, modulation, and output.
Remote operation, PC connectivity, and problem resolution.
Contact information for technical assistance.
Detailed technical specifications for the DSO2000 series oscilloscopes.
List of standard and optional accessories included with the oscilloscope.
Information on hazardous substances present in the oscilloscope components.
To Next Page
