1.6 Parameter Setting Method
Users can use the numeric keypad or knob and direction keys to set parameters.
1.6.1 Numeric Keypad
The numeric keypad consists of the following parts:
Number keys
The 0 to 9 number keys are used to directly input the desired parameter value.
Decimal point
Press this key to insert a decimal point "." at the current position of the cursor.
Operator Key
The operator key "+/-" is used to modify the operator of the parameter. Press this key to set the
parameter operator to "-".
1.6.2 DirectionKeys and Knob
Functions of the direction keys:
During parameter input, use the direction keys to move the cursor to select the digit to be
User Manual 13
To Next Page
Loading...
